Nowadays, cnc machine control has been more and more applied in modern manufacturing industry, and has played an incomparable advantage of ordinary machine tools. The machine has a high degree of automation, which can reduce the manual labor intensity of the operator. CNC machining process is automatically completed according to the input program, the operator only needs to start the knife, loading and unloading parts, replacing the tool, in the processing process, mainly to observe and supervise the operation of the machine tool.
The processing of the machine tool is generally consistent with the process regulations of the traditional processing, but because the CNC is a clamping, continuous automatic processing to complete all the turning processes, so you need to pay attention to some matters after the completion of the processing. But many people do not understand these matters very well, the following small series to summarize!
1. After the machine tool is processed, turn off the power supply and the total power supply on the machine tool operating panel in turn.
2, remove the chips, wipe the machine, using cnc machine control and the environment to keep clean.
3. Pay attention to check or replace the oil rub plate on the guide rail of the machine tool that has been damaged.
4, check the lubricating oil, coolant status, timely add or replace.
6, it is strictly prohibited to knock, correct and correct the workpiece on the chuck, between the center, must confirm the workpiece and the tool clamping before the next step can be carried out.
7, the operator must stop when changing the tool, the workpiece, adjusting the workpiece or leaving the machine.
8, machine tool accessories and measuring tools, tools should be properly kept, keep complete and good, lost or damaged pardoned compensation.
9, the operator is strictly prohibited to modify the machine parameters. If necessary, notify the device administrator and ask the device administrator to modify it.
10. Understand and master the control and operation panel of the machine tool and its operation essentials, input the program accurately into the system, and simulate the inspection and room cutting, and do the preparatory work before processing.
The above 10 points are the main points that need to be paid attention to after the completion of cnc machine control processing, of course, this is only a small series of words, if there is a wrong you can add.
cnc machine control https://www.zjshuangzheng.com/
